Newer
Older
# Load any additional property resources from a comma-delimited list
idp.additionalProperties= /conf/ldap.properties, /conf/saml-nameid.properties, /conf/services.properties
# Set the scope used in the attribute resolver for scoped attributes
# General cookie properties (maxAge only applies to persistent cookies)
#idp.cookie.secure = false
#idp.cookie.httpOnly = true
#idp.cookie.domain =
#idp.cookie.path =
#idp.cookie.maxAge = 31536000
# Set the location of user-supplied web flow definitions
#idp.webflows = %{idp.home}/flows
# Set the location of Velocity view templates
#idp.views = %{idp.home}/views
# Settings for internal AES encryption key
#idp.sealer.storeType = JCEKS
#idp.sealer.updateInterval = PT15M
#idp.sealer.aliasBase = secret
idp.sealer.storeResource= %{idp.home}/credentials/sealer.jks
idp.sealer.versionResource= %{idp.home}/credentials/sealer.kver
#
# adamhl: idp.sealer.storePassword and idp.sealer.keyPassword need to be
# set to the SAME value (why?!?).
idp.sealer.storePassword= %%DATA_SEALER_PASSWORD%%
idp.sealer.keyPassword= %%DATA_SEALER_PASSWORD%%
# Settings for public/private signing and encryption key(s)
# During decryption key rollover, point the ".2" properties at a second
# keypair, uncomment in credentials.xml, then publish it in your metadata.
idp.signing.key= /etc/ssl/private/idp-metadata-uat.key
idp.signing.cert= /etc/ssl/certs/idp-metadata-uat.pem
idp.encryption.key= /etc/ssl/private/idp-metadata-uat.key
idp.encryption.cert= /etc/ssl/certs/idp-metadata-uat.pem
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
#idp.encryption.key.2 = %{idp.home}/credentials/idp-encryption-old.key
#idp.encryption.cert.2 = %{idp.home}/credentials/idp-encryption-old.crt
# Sets the bean ID to use as a default security configuration set
#idp.security.config = shibboleth.DefaultSecurityConfiguration
# To default to SHA-1, set to shibboleth.SigningConfiguration.SHA1
#idp.signing.config = shibboleth.SigningConfiguration.SHA256
# Configures trust evaluation of keys used by services at runtime
# Defaults to supporting both explicit key and PKIX using SAML metadata.
#idp.trust.signatures = shibboleth.ChainingSignatureTrustEngine
# To pick only one set to one of:
# shibboleth.ExplicitKeySignatureTrustEngine, shibboleth.PKIXSignatureTrustEngine
#idp.trust.certificates = shibboleth.ChainingX509TrustEngine
# To pick only one set to one of:
# shibboleth.ExplicitKeyX509TrustEngine, shibboleth.PKIXX509TrustEngine
# If true, encryption will happen whenever a key to use can be located, but
# failure to encrypt won't result in request failure.
#idp.encryption.optional = false
# Configuration of client- and server-side storage plugins
#idp.storage.cleanupInterval = PT10M
#idp.storage.htmlLocalStorage = false
# Set to true to expose more detailed errors in responses to SPs
#idp.errors.detailed = false
# Set to false to skip signing of SAML response messages that signal errors
#idp.errors.signed = true
# Name of bean containing a list of Java exception classes to ignore
#idp.errors.excludedExceptions = ExceptionClassListBean
# Name of bean containing a property set mapping exception names to views
#idp.errors.exceptionMappings = ExceptionToViewPropertyBean
# Set if a different default view name for events and exceptions is needed
#idp.errors.defaultView = error
# Set to false to disable the IdP session layer
#idp.session.enabled = true
# Set to "shibboleth.StorageService" for server-side storage of user sessions
idp.session.StorageService = shibboleth.ClientSessionStorageService
# Size of session IDs
#idp.session.idSize = 32
# Bind sessions to IP addresses
#idp.session.consistentAddress = true
# Inactivity timeout
#idp.session.timeout = PT60M
# Extra time to store sessions for logout
#idp.session.slop = PT0S
# Tolerate storage-related errors
#idp.session.maskStorageFailure = false
# Track information about SPs logged into
#idp.session.trackSPSessions = false
# Support lookup by SP for SAML logout
#idp.session.secondaryServiceIndex = false
# Length of time to track SP sessions
#idp.session.defaultSPlifetime = PT2H
# Regular expression matching login flows to enable, e.g. IPAddress|Password
idp.authn.flows= RemoteUser|TwoStepRemoteUser
# Regular expression of forced "initial" methods when no session exists,
# usually in conjunction with the idp.authn.resolveAttribute property below.
#idp.authn.flows.initial = Password
# Set to an attribute ID to resolve prior to selecting authentication flows;
# its values are used to filter the flows to allow.
#idp.authn.resolveAttribute = eduPersonAssurance
# Default lifetime and timeout of various authentication methods
#idp.authn.defaultLifetime = PT60M
#idp.authn.defaultTimeout = PT30M
# Whether to prioritize "active" results when an SP requests more than
# one possible matching login method (V2 behavior was to favor them)
#idp.authn.favorSSO = true
# Whether to fail requests when a user identity after authentication
# doesn't match the identity in a pre-existing session.
#idp.authn.identitySwitchIsError = false
# Set to "shibboleth.StorageService" or custom bean for alternate storage of consent
idp.consent.StorageService= shibboleth.ClientSessionStorageService
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
# Set to "shibboleth.consent.AttributeConsentStorageKey" to use an attribute
# to key user consent storage records (and set the attribute name)
idp.consent.userStorageKey= shibboleth.consent.AttributeConsentStorageKey
idp.consent.userStorageKeyAttribute= %{idp.persistentId.sourceAttribute}
# Flags controlling how built-in attribute consent feature operates
#idp.consent.allowDoNotRemember = true
idp.consent.allowGlobal= false
#idp.consent.allowPerAttribute = false
# Whether attribute values and terms of use text are compared
idp.consent.compareValues= true
# Maximum number of consent records for space-limited storage (e.g. cookies)
idp.consent.maxStoredRecords= -1
# Maximum number of consent records for larger/server-side storage (0 = no limit)
#idp.consent.expandedMaxStoredRecords = 0
# Time in milliseconds to expire consent storage records.
#idp.consent.storageRecordLifetime = P1Y
# Whether to lookup metadata, etc. for every SP involved in a logout
# for use by user interface logic; adds overhead so off by default.
#idp.logout.elaboration = false
# Whether to require logout requests be signed/authenticated.
#idp.logout.authenticated = true
# Message freshness and replay cache tuning
#idp.policy.messageLifetime = PT3M
#idp.policy.clockSkew = PT3M
# Set to custom bean for alternate storage of replay cache
#idp.replayCache.StorageService = shibboleth.StorageService
# Toggles whether to allow outbound messages via SAML artifact
#idp.artifact.enabled = true
# Suppresses typical signing/encryption when artifact binding used
#idp.artifact.secureChannel = true
# May differ to direct SAML 2 artifact lookups to specific server nodes
#idp.artifact.endpointIndex = 2
# Set to custom bean for alternate storage of artifact map state
#idp.artifact.StorageService = shibboleth.StorageService
# Name of access control policy for various admin flows
idp.status.accessPolicy= AccessByIPAddress
idp.resolvertest.accessPolicy= AccessByIPAddress
idp.reload.accessPolicy= AccessByIPAddress
# Comma-delimited languages to use if not match can be found with the
# browser-supported languages, defaults to an empty list.
idp.ui.fallbackLanguages= en,de,fr
# Storage service used by CAS protocol
# Defaults to shibboleth.StorageService (in-memory)
# MUST be server-side storage (e.g. in-memory, memcached, database)
# NOTE that idp.session.StorageService requires server-side storage
# when CAS protocol is enabled
#idp.cas.StorageService=shibboleth.StorageService
# CAS service registry implementation class
#idp.cas.serviceRegistryClass=net.shibboleth.idp.cas.service.PatternServiceRegistry
# Profile flows in which the ProfileRequestContext should be exposed
# in servlet request under the key "opensamlProfileRequestContext"
#idp.profile.exposeProfileRequestContextInServletRequest = SAML2/POST/SSO,SAML2/Redirect/SSO
# F-TICKS auditing - set salt to include hashed username
#idp.fticks.federation=MyFederation
#idp.fticks.algorithm=SHA-256
#idp.fticks.salt=somethingsecret
idp.entityID.metadataFile=