... | ... | @@ -35,8 +35,7 @@ If you make changes to the above table, plan to make similar edits to: Vagrantf |
|
|
To set the context, VMs create their own MAC addresses, thus the set suggested will be fine, as the suggested MAC addrs will be seeded to the vm's. From the MAC address, the DCHP server should provide the fixed IP number indicated. Lastly, depending on how fancy your setup is, you may be able to assign a private or public FQDN for each planned VM.
|
|
|
|
|
|
|
|
|
Build the base system with its own hard coded MAC and IP, **with the user 'vagrant' (sudo enabled) and any pword you'll remember**. Use Centos7, do a minimal install to keep the footprint small.
|
|
|
|
|
|
Build the base system with its own hard coded MAC and IP, **with the user 'vagrant' (sudo enabled) and any pword you'll remember**. Use Centos7, do a minimal install and add the EPEL repository.
|
|
|
|
|
|
The base host needs two ethernet interfaces, but only one needs to be active. The easiest way to get this setup is to only plug in one ethernet cable to the base system during this initial install. Once the OS is installed, plug in the second ethernet cable into the second port or plug in the USB-enet adapter with the ethernet cable connected. Then use the following commands:
|
|
|
```
|
... | ... | |