GitLab

  - Changed bore for journal bearing from 0.375 to 0.377 (V drill bit),
    otherwise it's too tight and shaft doesn't rotate.
  - Changed pin hole on wing leaves from 0.125 to 0.130, to take a rivet
    rather than a pin.

Updates/fixes for tailboard_v2: fix connector orders to
match accelerometer board and LED JST connectors.
  - The Feather M4 header pinout is correct, will be fixed
    in v3.

Testboard: a board for testing LED strips. Plug in a Feather M4,
5V from a power supply, and then plug LED strips into it.

Pin Reverse board: a temporary fix for the Feather M4 pinout error
in the v2 tailboard. Reverses the pin order on one of the headers.

as 20mil.

Pin order now matches order on boards and is rotated for the two
wings.

  - Had channel cutout increased to 1.5mm from 1mm
  - Thickened due to larger cutout
  - Shaft bore increased to 0.257in for smoother fit

are calculated, by Charlie's request.
  - Front window flyers and now spaced 2 feet back from the window.
  - Exterior stair edge flyers are now spaced 2 feet away from the stair.
  - Exterior stair edge flyers can now be placed along edge of platform.
  - Inner stair edge flyers can be placed along edge of platform.

There is a bug in how the position of inner edge stair flyers are
placed: the stair calculations are a bit off, such that the angles
don't add up right. This means that on the upper stair, the flyers
seem to hang from under, rather than the edge of, the stair. I'll
look into it and fix it soon.

would like (hopefully)!

git submodules, and remove the (not working) run.sh script.

remove the networking directory.

Hinge redesign

See merge request !30

Fix wing builder? Add pattern, logo, statement and more doc

See merge request !29

Simulator prototype

See merge request !28